Don’t assume all remote and receiver are exactly the same; ours have actually a couple of dip switches that need certainly to be a similar.
Side note: we do not recommend making them on factory environment no matter if this is actually the very first fan in your house having a remote when you yourself have nearby next-door neighbors. The remotes are trying to find a specific collection of dipswitches, in case your neighbor is regarding the exact same regularity, your fixtures will speak with one another, meaning your fan will switch on and off at apparently random times. We additionally occur to have a number of these currently installed, so that it’s a trick to selecting a various environment than one we curently have.
Pull the plastic off finishes to your cables or strip all of them with a cable stripper, making certain there is about a half inch of bare wire and twist them together. This can be done together with your hands that are bare gloves because the energy is off we are circuitously in damage’s means.
So out comes the Sawzall. Perfect fit. Considering that the fan had beenn’t attaching right to a joist it had been going close to a joist we had to have just a little imaginative with connecting the container. We attached two tiny bits of 2×4 together also to the 2×4 over the roof to generate the weight and stability distribution we truly need through the fan field.
The fan is up; now we must connect the light fixture. Wiring this right component is not difficult, two cables that snap together. Tense up any screws to help keep the light kit in position, put the light bulbs in and put the light cover on. Additionally the fan is completed!
The receiver fits nicely up into the canopy associated with the fan, hidden away where nobody is able to see. Continue reading